Most journals ask for an author contributions statement, but the request often arrives when the manuscript is nearly finished and the team has stopped thinking about who did what. The result is a rushed paragraph of vague phrases: “All authors contributed to the writing” or “A.B. and C.D. designed the study.” Those statements pass a compliance check but fail the real job: giving a reviewer, editor, or future reader a clear and auditable account of the work.
This guide treats the contributions statement as a decision artifact, not a formality. It helps you diagnose what kind of statement your manuscript needs, assign credit consistently, draft the statement, verify that the method trail supports it, and decide when it is ready to submit.
Why Does an Author Contributions Statement Matter?
An author contributions statement clarifies who did what in a piece of scholarly work. When it is done well, it helps readers judge the roles behind the results and gives credit in a way that is harder to dispute later.
The International Committee of Medical Journal Editors (ICMJE) recommends four authorship criteria: substantial contribution to the conception or design of the work, or the acquisition, analysis, or interpretation of data; drafting or revising the work critically for important intellectual content; final approval of the version to be published; and agreement to be accountable for all aspects of the work. Every listed author should approve the final version and be accountable for the work.
A contributions statement becomes especially useful when the journal also asks about contributors who do not meet all four authorship criteria. Those people can still be named for specific contributions without being listed as authors.
Does Your Journal Want CRediT Roles or Prose?
Before drafting, check your target journal's instructions. Many journals now accept or require the CRediT taxonomy, while others want a short prose paragraph or a table.
The CRediT contributor roles taxonomy provides 14 standardized roles that can be used to describe who did what in scholarly work. Those roles include conceptualization, methodology, investigation, formal analysis, writing, review and editing, and others. The taxonomy is a controlled vocabulary, which means two teams can describe similar work in comparable terms.
One detail matters for author lists: CRediT roles describe contributions and do not by themselves determine authorship. A person listed with a CRediT role still must meet the journal's authorship criteria, and a contributor can have a role without being an author.
What Is Your Starting State?
Most author teams reach this task in one of three situations. Knowing which one applies changes how much evidence you need to gather.
Revising after peer review. The editor or a reviewer has asked for a clearer statement because the current one is generic or conflicts with the methods section. Here you are reconciling the statement with the manuscript that already exists.
Closing a project before submission. The analysis and drafting are finished, but the team has not formalized who should be credited for what. Here you are building the statement from the project's actual record.
Starting a new review or manuscript. Here you can preserve the contribution trail from the beginning, so the statement at the end is a summary rather than a reconstruction.
If you are in the third situation, set up a place to keep the manuscript, its references, and the related notes together. You can upload papers and organize them in the WisPaper library so the source material for the contribution record stays in one place.
What Should Count as a Contribution?
A contribution is work that can be tied to a specific part of the study and that matters for the published output. Use the journal's list or CRediT roles as prompts, then add the specifics that only your team knows.
A useful draft question for each author is, “What would break or be impossible to interpret if this person's work were removed?” That question separates substantive work from general support.
Keep two records side by side during this step: a per-author claim and the part of the manuscript or project that supports it. For example, if an author claims responsibility for the statistical analysis, the supporting record might be the analysis script, the results table, and the methods subsection that describes the model.
How Do You Reconstruct the Contribution Trail?
If the work is already done, reconstruct the trail from the artifacts you still have: manuscript drafts, analysis files, meeting notes, code commits, lab notebook entries, and reviewer correspondence. Work backward from the final manuscript sections and ask who produced each section's evidence.
For a reproducible-search or systematic-review project, the trail often lives in the search log, the screening decisions, the extraction form, and the methods text. Keep each source named and dated. If you used scholarly search results as part of that evidence base, you can find and re-verify the papers through WisPaper search.
The reconstruction step has a hard checkpoint: every named contribution in the statement must map to at least one artifact. If an author cannot point to an artifact, either the contribution claim is too broad or the artifact is missing, and the team needs to resolve that before submission.
Who Decides the Final List?
The final author list and the contribution descriptions should be agreed on by the whole team before submission. One author should lead the draft, but the others must confirm that their listed roles are accurate and that the overall statement matches the manuscript.
The ICMJE criterion that every listed author approves the final version provides the practical rule: no one should appear in the statement as an author if they have not seen and approved the final manuscript. If a contributor does not meet authorship criteria, the team can still name the specific contribution in the appropriate place, such as an acknowledgments section, according to the journal's format.
How Do You Draft the Statement?
Use a two-column approach for the first draft: one column for the author or contributor, one for the specific work and where it appears in the manuscript. Convert that table into the journal's required format only after the team agrees on the rows.
Prose example
A. Kumar and B. Chen conceptualized the study and designed the experimental protocol. A. Kumar, C. Osei, and D. Park collected and curated the data. C. Osei performed the formal analysis and produced the figures. B. Chen and D. Park interpreted the results. A. Kumar wrote the original draft. All authors reviewed and edited the manuscript and approved the final version.
CRediT example
| Author | Roles |
|---|---|
| A. Kumar | Conceptualization, Methodology, Writing – original draft |
| B. Chen | Conceptualization, Writing – review & editing |
| C. Osei | Data curation, Formal analysis, Visualization |
| D. Park | Investigation, Writing – review & editing |
In both formats, the draft is useful only if it can be checked against the underlying record. In the first example, the claim that C. Osei performed the formal analysis should be verifiable in the methods and results sections. In the second, the taxonomy roles should match the same sections.
Worked Example: Reproducible-Search Manuscript
A team closes out a methods-focused manuscript that reports a reproducible literature search. The four members worked on different stages, and the journal requests CRediT roles.
The team starts from the search protocol and the screening log. D. Park wrote the protocol and translated the research question into the search strategy. A. Kumar ran the searches in two databases and exported the record set. C. Osei screened the records against the inclusion criteria and resolved conflicts with B. Chen. C. Osei extracted the data. A. Kumar wrote the results narrative. B. Chen edited the methods for reproducibility.
The team writes the statement as CRediT roles and checks each role against an artifact:
| Author | Claimed role | Supporting artifact |
|---|---|---|
| D. Park | Conceptualization, Methodology | Protocol draft; search strategy paragraph in Methods |
| A. Kumar | Investigation, Writing – original draft | Database search logs; exported record set; Results section draft |
| C. Osei | Data curation, Formal analysis | Screening log; extraction form; results tables |
| B. Chen | Supervision, Writing – review & editing | Conflict-resolution notes; tracked edits to Methods |
Before submission, B. Chen removes the “Supervision” role after the team agrees the screening work is better described as validation of the inclusion decisions. The final statement is narrower and easier to defend.
How Do You Check the Statement Against the Manuscript?
The readiness check has three parts.
-
Coverage check. Every role in the statement should correspond to a described part of the study. If the statement says an author led the experimental design, the methods section should show that design work.
-
Consistency check. The author initials should not contradict the manuscript. If the corresponding author is named in one place and a different order appears in the contribution statement, fix one of them before submission.
-
Audit check. The team should be able to trace each major contribution to an artifact without opening new analysis or remembering from scratch. If a supporter asks how a role was decided, the answer should point to the protocol, log, draft, or review trail.
For manuscripts that rely on cited sources, the audit check also covers the reference list. If a claim in the contribution statement depends on a cited method or dataset, the citation must match a real source. BibTeX files can contain references that do not exist, so screening them against real academic databases before final submission is a concrete readiness step. The TrueCite workflow checks BibTeX against academic databases to flag hallucinated references.
Keep the Method Trail Auditable as You Revise
The statement is easier to write if the team records contribution decisions as they happen, not after the fact. For a new project, keep a short running file with one row per major task: the person, the date, the artifact, and the CRediT role or plain-language label that applies.
If the manuscript is part of a larger effort, keep that file inside the same project space as the draft and its references. The Research Projects area in WisPaper lets you keep related work together so the contribution file does not drift out of sync with the manuscript version it describes.
For a revision, use the reviewer's comment as the checkpoint. If the reviewer says the statement is unclear, add specificity rather than length. Replace “contributed to data analysis” with the named analysis and the artifact that shows it.
When Is the Statement Ready to Submit?
The statement is ready when four conditions are all true:
- The format matches the journal's instructions, including CRediT or prose as required.
- Every listed author has confirmed their stated roles and approved the final manuscript version, consistent with ICMJE guidance that every listed author should approve the final version.
- Every major contribution maps to a named artifact in the manuscript, methods supplement, or project record.
- Contributor-only roles are handled through the journal's preferred acknowledgment path, not silently folded into authorship.
If the team is uncertain about a role, the safer revision is to narrow the claim. A statement that understates a specific contribution is easier to verify than one that overstates a broad role.
Checklist: Author Contributions Statement
Use this before submission.
| Check | Done |
|---|---|
| Target journal format identified: CRediT, prose, or table | |
| Every author's contribution written in specific terms | |
| Every contribution maps to a manuscript section or artifact | |
| Contributor-only work listed separately from authorship | |
| All authors reviewed and approved the final statement and manuscript | |
| Author names and order in the statement match the title page | |
| Citation-dependent contribution claims checked against a real reference list |




