November 16, 2026

Research Reporting Checklist: Methods, Statistics, and Transparency

A reporting checklist turns a finished analysis into a manuscript an editor can actually evaluate. The central task is not "find a checklist," but match the checklist to your study design and then prove, item by item, th

Written byWisPaper TeamAI Research Workflow Team
Editorial illustration for Research Reporting Checklist: Methods, Statistics, and Transparency

A reporting checklist turns a finished analysis into a manuscript an editor can actually evaluate. The central task is not "find a checklist," but match the checklist to your study design and then prove, item by item, that the manuscript carries the right information in the right section. This guide walks through that process for students and early-career researchers finishing a course paper, thesis chapter, or first manuscript.

Where are you in the reporting process?

Start by naming your starting state, because the next useful action differs at each point.

Starting stateWhat you haveMost urgent gapFirst action
Draft exists, no checklist usedA full methods and results sectionNo structured check against the designIdentify the design-specific guideline and run its items
Checklist used once, near the endA marked-up checklistItems fixed but not verified in the textRe-check each fixed item against the actual manuscript wording
Supervisor returned feedbackComments on unclear methods or statisticsFeedback scattered across sectionsMap each comment to a checklist item, then revise in one pass
Starting a new projectA research question and rough designReporting requirements not yet knownDownload the guideline before data collection, not after

If you are preparing the next project after handing in a course paper, you can use the same diagnostic as a year-end reset: archive what you learned, then collect the guideline for the incoming study before you write its methods.

Which reporting guideline fits my study design?

The EQUATOR Network organizes reporting guidelines by study type and specialty so authors can choose a checklist that matches the design they are reporting. The choice is not decorative. A systematic review needs different items than a cohort study, and using the wrong list leaves large gaps an editor or examiner will find.

Common starting points:

  • Systematic review — PRISMA 2020 provides a 27-item checklist, expanded explanations, an abstract checklist, and flow diagrams for transparent reporting of systematic reviews.
  • Cohort, case-control, or cross-sectional study — STROBE provides reporting checklists for these observational designs, including items for methods, results, discussion, and other information.
  • Other designs and specialties — Search the EQUATOR database by the design or field you are reporting to find the matching list.

The decision table below pairs the reader's situation with the guideline and the WisPaper action that supports it.

SituationGuideline to useSupporting WisPaper step
I completed a systematic reviewPRISMA 2020 checklist and flow diagramSave the final included-study papers in My Library to keep the screening set tied to the PRISMA flow diagram
I ran a cohort, case-control, or cross-sectional studySTROBE checklist for the matching designUse WisPaper search to find papers using the same design and study how they phrased their methods items
I do not know which guideline appliesEQUATOR database by study typeRead abstracts in Scholar search results, then organize the shortlisted papers in My Library
I am in a specialty with its own reporting standardEQUATOR list for that specialtyCollect the guideline and example papers in a new Research Project before drafting

Choosing the guideline early changes what you record while working. For a systematic review, the PRISMA flow diagram depends on knowing how many records were screened at each stage; reconstructing those numbers after the fact is slower than capturing them as you go.

What goes in the methods section, item by item?

A checklist is only useful when you can point to the sentence that satisfies each item. Work through the list as a mapping exercise: for every checklist item, mark the section, paragraph, and specific sentence in your draft that answers it. If you cannot find the sentence, the item is genuinely missing, not just "implied."

For a cohort study following STROBE, typical methods items include the setting, participants, variables, data sources, bias, study size, quantitative variables, and statistical methods. For a systematic review following PRISMA, the items cover eligibility criteria, information sources, search strategy, selection process, data collection, risk of bias, effect measures, and synthesis methods.

A practical sequence for the mapping:

  1. Copy the checklist items into a tracking table with columns for section, paragraph, and current sentence.
  2. Fill in what exists. Leave blank rows for missing items.
  3. For each blank row, decide whether the item belongs in the methods, results, or discussion.
  4. Draft the missing sentences using the same terminology as the guideline.
  5. Re-read the surrounding paragraph to make sure the new sentence reads as part of the argument, not as a checklist echo.

If the manuscript includes a statistical plan, the checklist helps you check that every analysis mentioned in the methods appears in the results, and that every result can be traced back to a stated method.

How can I verify that my statistics match my methods?

The standard failure is a methods section that promises one analysis and a results section that reports another. A reporting checklist is the cross-check tool: walk the methods items against the results items and confirm they align.

Use this verification table while you revise.

Reporting checkWhat to compareWhat to fix if they differ
Analysis consistencyStatistical methods stated in methods vs. tests reported in resultsAdd the missing method or correct the result
Variable consistencyVariables defined in methods vs. variables named in resultsUse one name throughout
Sample flowParticipants described in methods vs. numbers in resultsReconcile the flow, especially exclusions
Effect measuresEffect measure declared in methods vs. reported estimatesState the measure in results

When statistics are complex, the fastest way to test your own explanation is to ask a targeted question. With the relevant papers in your library, Library QA lets you ask questions based on papers you have uploaded or added from search results. For a reporting task, use it to check how similar studies described a given analysis, then compare those descriptions with your own wording.

What does transparent reporting actually require?

Transparency means a reader could reconstruct the study decisions without asking you. Checklist items are the concrete expression of that idea: where the data came from, who was included, how variables were defined, which statistics were used, and what the limitations are.

ICMJE guidance describes the standard parts of a biomedical manuscript and tells authors to follow the selected journal's current instructions for article type, format, required statements, and submission materials. That means transparency has two layers: the reporting guideline for your design, and the journal's own required statements, such as funding, conflicts of interest, and data availability.

A practical check is to read only your methods and results sections, as if you had not done the study, and list every decision you cannot recover from the text. Each missing decision marks either a checklist gap or an unclear sentence.

Should I run the checklist before or after a supervisor revision?

Run it before. A checklist pass converts a large set of supervisor comments into a smaller set of real gaps. When feedback arrives, map each comment to a checklist item. Comments that match an already-fixed item usually mean the revision is not visible in the sentence where the reader expected it; comments with no matching item often signal the wrong guideline was used or a journal-specific requirement is missing.

If you are preparing to hand in a thesis chapter, do the checklist pass as part of the final editing round, not as a separate research task. Print the guideline, annotate the manuscript directly, and leave the completed checklist in your project folder as evidence of the pass for future readers.

From finished manuscript to the next project

The same checklist becomes a planning tool for the next study. Before you collect data for the new project, download the guideline you will eventually report against and read the methods items. This tells you what to record from day one: participant flow numbers, variable definitions, data sources, and pre-specified analyses.

A January project-start routine:

  1. Open the study design document for the new project.
  2. Identify the design-specific reporting guideline.
  3. Copy the methods items into a planning table with a column for "where we will record this."
  4. Set up a Research Project to hold the guideline, example papers, and the planning table.
  5. Save the guideline and two worked example papers in My Library for reference during drafting.

When the project starts with the guideline in hand, the final reporting pass becomes a verification rather than a rescue operation.

What comes after the checklist? A completion check

You know the manuscript is ready for submission or hand-in when the checklist is not merely ticked but traceable. Three completion signals:

  1. Every methods item maps to a sentence. No checklist item remains "understood" or "implied."
  2. Statistics and results are consistent. Every reported number traces to a stated method, and every stated method produces a reported result.
  3. Journal or department requirements are added on top of the guideline. The selected journal's current instructions for format, statements, and submission materials are followed alongside the design-specific checklist.

The day of submission, the artifact you hand over is not only the manuscript but the mapped checklist that proves the reporting work you did.

FAQs

Use the closest matching design-specific guideline as the base, then check EQUATOR for a specialty-specific list. If your design combines elements, satisfying the closest guideline first, then adding the specialty items, is a defensible reporting position. The key is that you can say which guideline was used and where each item sits in the manuscript.